Reverse Clutch Housing and Second Sprag Disassemble

Reverse Clutch Housing and Second Sprag Disassemble

Tools Required

J 39694 Spring Compressor




1. Remove the spiral snap ring (519). Discard the snap ring, which is not reusable.
2. Remove the following parts:
^ The sprag clutch retainer (518)
^ The second sprag outer race
^ The second sprag clutch (516-517)
^ The second sprag outer race thrust washer (520)




3. Remove the following parts:
^ The reverse clutch snap ring (515)
^ The reverse clutch backing plate (512)
^ All of the fiber (513) and steel (511) clutch plates
^ The reverse clutch waved plate (514)




4. Install the J 39694 spring compressor and compress the spring and retainer assembly (509). Then remove the snap ring (510).




5. Remove the following parts:
^ The snap ring retainer (509)
^ The spring and retainer assembly (508)
^ The piston assembly (505)