Fan Replacement

Fan Replacement (LY7)

Tools Required

J 41240 Fan Clutch Wrench

Removal Procedure




1. Remove the air cleaner intake duct.
2. Loosen the fan nut from the crank adapter shaft using J 41240.
3. Remove the fan from the vehicle.

Installation Procedure




1. Install the fan to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Tighten the fan nut to the crank adapter shaft using J 41240.

Tighten the nut to 100 N.m (74 lb ft).

3. Install the air cleaner intake duct.