Headlamp Leveling Front Suspension Height Sensor Replacement

Headlamp Leveling Front Suspension Height Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the right front tire and wheel assembly.




3. Disconnect the electrical connector (1).




4. Disconnect the ball and socket (1) from the vehicle.
5. Remove the bolt (2) from the sensor.
6. Remove the sensor from the vehicle.

Installation Procedure




1. Position the sensor to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolt (2) to secure the sensor to the vehicle.

Tighten the bolt to 9 N.m (80 lb in).

3. Install the ball and socket (1) to the sensor.




4. Connect the electrical connector (1) to the sensor.
5. Install the right tire and wheel assembly.
6. Lower the vehicle.