Antenna: Testing and Inspection

Antenna Module Programming and Setup

Each of the following service procedures requires programming or setup procedures to be performed on the radio.

Antenna Module Replacement

If the antenna module is replaced, the following procedure must be performed:

Without RPO UJ6

Perform the transmitter programming procedure for the radio antenna module. Refer to Transmitter Programming (Domestic) Transmitter Programming (Export - Including Canada) in Keyless Entry. Programming and Relearning Programming and Relearning

With RPO UJ6

Perform the Tire Pressure Learn procedure. Refer to Tire Pressure Sensor Learn in Tire Pressure Monitoring and the transmitter programming procedure for the radio antenna module. Refer to Transmitter Programming (Domestic) Transmitter Programming (Export - Including Canada) in Keyless Entry.