Radio Replacement

Radio Replacement

Removal Procedure

1. Remove the Instrument panel (I/P) center trim.




2. Remove the bolts (1) securing the radio to the I/P.
3. Disconnect the electrical connectors.

Installation Procedure




1. Connect the electrical connectors.

Notice: Refer to Fastener Notice.

2. Install the bolts (1) securing the radio the I/P.

Tighten the bolts (1) to 9 N.m (80 lb in).

3. Install the I/P center trim.
4. Refer to Programming and Relearning Programming and Relearning