HVAC Control Module Replacement

HVAC Control Module Replacement

Removal Procedure

1. Remove the ashtray. Refer to Ashtray Replacement.




2. Remove the radio.
3. Remove the HVAC control module retaining screws.
4. Disconnect the HVAC control module electrical connectors.
5. Remove the HVAC control module.

Installation Procedure

1. Install the HVAC control module.




2. Connect the HVAC control module electrical connectors.

Notice: Refer to Fastener Notice.

3. Install the HVAC control module retaining screws.

Tighten the screws to 2 N.m (18 lb in).

4. Install the radio.
5. Install the ashtray.
6. Refer to Refer to Programming and Relearning Programming and Relearning