Instrument Cluster / Carrier: Service and Repair

Instrument Cluster Replacement

Removal Procedure

1. Remove the instrument panel cluster trim.




2. Remove the 4 screws (1) securing the instrument panel cluster.
3. Disconnect the electrical connector.

Installation Procedure




1. Connect the electrical connector.

Notice: Refer to Fastener Notice.

2. Install the 4 screws (1) securing the instrument panel cluster.

Tighten the screws (1) to 2 N.m (9 lb in).

3. Install the instrument panel cluster trim.
4. Refer to Programming and Relearning Programming and Relearning