Generator Bracket Replacement (LH2)

Generator Bracket Replacement (LH2)

Removal Procedure




1. Disconnect the battery negative cable.
2. Remove the generator.
3. Remove the generator drive belt tensioner.
4. Remove the right side engine mount bracket.
5. Remove the generator bracket bolts (1, 2 and 3).
6. Remove the generator bracket from the engine.

Installation Procedure




1. Install the generator bracket to the engine.

Notice: Refer to Fastener Notice.

2. Install the generator bracket bolts.

Tighten the generator bracket bolts in the sequence shown to 50 N.m (37 lb ft).

3. Install the right side engine mount bracket.
4. Install the generator drive belt tensioner.
5. Install the generator.
6. Connect the battery negative cable.