Air Inlet Housing Front Panel Replacement

Air Inlet Housing Front Panel Replacement

Removal Procedure

1. Remove the fuel injector sight shield.
2. Remove the windshield wiper arms.
3. Remove the air inlet grille panel (1).




4. Disconnect the electrical connector (4) from the windshield wiper motor.
5. Remove the wiper motor module (6).




6. Remove the air inlet housing retaining nuts/bolts.
7. Remove the air inlet housing panel assembly from the vehicle.

Installation Procedure




1. Install the air inlet housing panel assembly to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the air inlet housing retaining nuts/bolts.

Tighten the nuts/bolt to 6 N.m (53 lb in).




3. Install the wiper motor module (6).
4. Install the electrical connector (4) to the windshield wiper motor.
5. Install the air inlet grille panel (1).
6. Install the windshield wiper arms.
7. Install the fuel injector sight shield.