Cylinder Head Replacement - Right

Cylinder Head Replacement - Right Side

Removal Procedure

1. Remove the following subassemblies:

* The right exhaust manifold
* The supercharger
* The water crossover
* The right secondary camshaft drive chain
* The right camshaft




2. Remove the right cylinder head. Make sure that no dowel guide pins are stuck in the cylinder head.
3. Disassemble the right cylinder head.
4. Clean and inspect the cylinder head.
5. Assemble the right cylinder head.

Installation Procedure




1. Install the right cylinder head.
2. Install the following subassemblies:

* The right camshaft
* The right secondary camshaft drive chain
* The water crossover
* The supercharger
* The right exhaust manifold