Oil Pump Outlet Tube Replacement

Oil Pump Outlet Tube Replacement

Tools Required

J 39946 Crankshaft Socket

Removal Procedure




1. Remove the oil pump.
2. Remove the crankshaft sprocket to oil pump drive friction washer.




3. Align the primary timing marks (1) using the J 39946.
4. Remove the secondary camshaft drive chains.
5. Remove the primary drive chain tensioner.




6. Remove the oil outlet tube bolts (1-5).
7. Remove the oil outlet tube.




8. Remove and discard the oil outlet tube O-ring.
9. Clean and inspect the oil outlet tube.

Installation Procedure




1. Install a NEW O-ring on the oil outlet tube.
2. Apply lubricant to the O-ring.





Notice: Refer to Fastener Notice.

3. Install the oil outlet tube and bolts (1-5).

Tighten the oil outlet tube bolts to 10 N.m (89 lb in).




4. Ensure the primary timing marks (1) are aligned vertically using the J 39946.
5. Install the primary drive chain tensioner.
6. Install the secondary camshaft drive chains.




7. Install the crankshaft sprocket to oil pump drive friction washer. The crankshaft sprocket to oil pump drive friction washer outer diameter is 62.0 mm (2.4410 in) and the inner diameter is 45.25 mm (1.7815 in).
8. Install the oil pump.