1. Supercharger Inlet Duct Removal

Supercharger Inlet Duct Removal




1. Disconnect and remove the evaporative emissions (EVAP) hose.




2. Remove the supercharger inlet duct ballstud nuts.




3. Loosen the front screw clamps (1) on the inlet duct seals.




4. Lift the front of the front air duct in order to access the clean air positive crankcase ventilation (PCV) hose connector at the bottom of the front air duct.
5. Disconnect the clean air PCV hose (1) from the front air duct.




6. Remove the front air duct.




7. Disconnect and remove the clean air PCV hose from the left camshaft cover fitting.




8. Loosen the rear screw clamps (1) on the inlet duct seals.




9. Remove the inlet duct seals.




10. Loosen the rear screw clamp (1) on the throttle body duct seal.




11. Remove the rear air duct.




12. Loosen the front screw clamp (1) on the throttle body duct seal.




13. Remove the throttle body duct seal.