2. Engine Wiring Harness Assembly Removal

Engine Wiring Harness Assembly Removal

Left Side Harness Connections




1. Disconnect the engine wiring harness from the oil level switch/temperature sensor.




2. Disconnect the engine wiring harness from the air conditioner compressor.




3. Disconnect the engine wiring harness from the oil pressure sensor.




4. Disconnect the engine wiring harness from the supercharger charge air bypass regulator solenoid valve.




5. Disconnect the engine wiring harness from the left camshaft position sensors.




6. Disconnect the engine wiring harness from the left camshaft position actuators.




7. Disconnect the engine wiring harness from the throttle body.




8. Disconnect the engine wiring harness from the evaporative emissions (EVAP) canister purge solenoid.




9. Disconnect the engine wiring harness from the left coil assembly harness.




10. Disconnect the engine wiring harness from the left camshaft cover.




11. Disconnect the engine wiring harness from the left side fuel injectors.




12. Disconnect the engine wiring harness starter connector from the starter wiring harness.




13. Remove the left rear engine harness bracket bolt and nut.




14. Remove the left rear engine harness bracket.

Right Side Harness Connections




1. Remove the generator positive battery cable nut.
2. Remove the generator positive battery cable.




3. Disconnect the engine wiring harness from the generator.




4. Disconnect the engine wiring harness clips from the generator.




5. Disconnect the engine wiring harness from the right camshaft position sensors.




6. Disconnect the engine wiring harness from the right camshaft position actuators.




7. Disconnect the engine wiring harness from the intake air temperature (IAT) sensor 2.




8. Disconnect the engine wiring harness from the (1) supercharger inlet absolute pressure sensor, (2) barometric pressure (BARO) sensor, (3) manifold absolute pressure (MAP) sensor.




9. Disconnect the engine wiring harness from the right coil assembly harness.




10. Disconnect the engine wiring harness from the right camshaft cover.




11. Disconnect the engine wiring harness from the right side fuel injectors.




12. Disconnect the engine wiring harness from the engine coolant temperature (ECT) sensor at the rear of the right cylinder head.




13. Disconnect the engine wiring harness from the knock and crankshaft position sensor wiring harness.




14. Remove the right side engine harness bracket bolts.




15. Remove the right side rear engine harness bracket.




16. Remove the right rear engine harness bracket bolt.




17. Remove the right rear engine harness bracket.




18. Remove the engine wiring harness from the engine block.