Differential Carrier Assembly Replacement

Differential Carrier Assembly Replacement

Tools Required

J 44394 Seal Protector

Removal Procedure

Important: The intermediate wheel drive shaft and the differential are to be installed and removed as a assembly.

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Lower the front frame assembly. Refer to Front Frame Replacement.
3. Remove front propeller shaft from the differential and position out of the way.
4. Remove the right front wheel drive shaft.
5. Remove the left front wheel drive shaft.
6. Remove the intermediate wheel drive shaft support bearing.





7. Position a transmission jack beneath the differential.
8. Firmly secure the differential to the transmission jack.
9. Remove the front differential to oil pan mounting bolts.
10. Disengaging the intermediate wheel drive shaft and the front differential from the oil pan.

Installation Procedure





Important: The intermediate wheel drive shaft and the differential are to be installed removed as a assembly.

Important: In order to prevent lubricant leaks, use care when installing the wheel drive shaft to the differential. Do not damage the oil seal. Replace the oil seal if it becomes nicked, distorted, or is otherwise damaged.

1. Position the differential on a transmission jack.
2. Firmly secure the differential to the transmission jack.
3. With the differential firmly attached to the jack, install the intermediate wheel drive shaft and the front differential to the oil pan.

Notice: Refer to Fastener Notice.

4. Install the front differential to oil pan mounting bolts.

Tighten the front differential to oil pan mounting bolts in sequence to (1-3) to 110 N.m (81 lb ft).

5. Remove the transmission jack from the differential.
6. Install the intermediate wheel drive shaft support bearing.
7. Carefully install the left wheel drive shaft to the intermediate wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement (Left) Front Wheel Drive Shaft Replacement (Right).
8. Install the right front wheel drive shaft.
9. Install the front propeller shaft to the differential.
10. Inspect the differential lubricant level.
11. Install the front frame assembly.
12. Lower the vehicle