B2923
DTC B2923
Circuit Description
When the content theft deterrent (CTD) system arms, and the inclination sensor is enabled, the rear integration module (RIM) receives a power-up acknowledgement from the inclination sensor via the inclination sensor enable circuit.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC B2923 Content Theft System Inclination Sensor Signal Circuit
Conditions for Running the DTC
* The inclination sensor is enabled.
* The CTD system has armed.
Conditions for Setting the DTC
The RIM does not receive the power-up acknowledgement from the inclination sensor.
Action Taken When the DTC Sets
The RIM will ignore all inputs from the inclination sensor for the remainder of the CTD system arming cycle.
Conditions for Clearing the MIL/DTC
DTC B2923 will be cleared if any of the following occur:
* The RIM receives a power-up acknowledgement from the inclination sensor during the next CTD system arming cycle, and the inclination sensor is enabled.
* You use the scan tool to clear DTCs.
Test
