Fan Replacement

Fan Replacement (LH2)

Tools Required

J 41240 Fan Clutch Remove and Installer

Removal Procedure




1. Remove the air cleaner intake duct.

Important: Do not completely remove the fan from the crank adapter shaft.

2. Loosen the fan nut from the crank adapter shaft using J 41240.
3. Remove the fan shroud.
4. Continue to loosen the fan nut and disconnect the fan from the crank adapter shaft.
5. Remove the fan from the vehicle.

Installation Procedure




1. Install the fan to the vehicle.
2. Connect the fan to the crank adapter shaft.
3. Install the fan shroud.

Notice: Refer to Fastener Notice in Service Precautions.

4. Tighten the fan nut to the crank adapter shaft using J 41240.

Tighten the nut to 100 N.m (74 lb ft).

5. Install the air cleaner intake duct.