Windshield Washer Hose: Service and Repair

Windshield Washer Hose Replacement

Removal Procedure




1. Remove the air deflector.
2. Disconnect the washer hose (2) from the washer pump (5).
3. Drain the washer solvent into a suitable container.
4. Remove the hood insulator.
5. Remove the passenger side air inlet grille.




6. Disconnect the washer hose retainer clip (1) from the inside of the hood hinge.




7. Disconnect the washer hose connections (3, 6) from the washer nozzles.
8. Remove the washer hose from the passenger side inner fender.
9. Remove the hose rearward from the passenger side hood hinge.
10. Remove the washer hose from the vehicle.

Installation Procedure




1. Position the washer hose around the passenger side hood hinge (1).
2. Route the hose (washer pump end first) forward behind the bracket securing the inner fender to the wheelhouse.
3. Route the hose (4) downward to the washer solvent container.
4. Secure the washer hose retainer (1) to the inside edge of the hood hinge.
5. Connect the washer hose connections (2) to the washer nozzles.
6. Install the passenger side air inlet grille (1).
7. Install the hood insulator.




8. Connect the washer hose (2) to the washer pump (5).
9. Install the air deflector.
10. Fill the washer solvent container.
11. Verify washer operation.