139. Exhaust Manifold Installation - Left Side

Exhaust Manifold Installation - Left Side




1. Install the bell housing.

Notice: Refer to Fastener Notice.

2. Install the bell housing bolts.

Tighten the bell housing bolts to 50 N.m (37 lb ft).




3. Install the right engine flywheel housing cover.
4. Install the right engine flywheel housing cover bolts.

Tighten the exhaust manifold studs to 10 N.m (89 lb in).




5. Install the left engine flywheel housing cover.




6. Install the left engine mount bracket.
7. Install the left engine mount bracket bolts.

Tighten the engine mount bracket bolts to 58 N.m (43 lb ft).




8. Install the engine mount heat shield to the engine mount.




9. Install the left engine mount.
10. Install the left engine mount upper nut.

Tighten the engine mount upper nut to 58 N.m (43 lb ft).




11. Install the left exhaust manifold studs to the left cylinder head.

Tighten the exhaust manifold studs to 6 N.m (53 lb in).




12. Install the NEW left exhaust manifold gasket.




13. Install the left exhaust manifold.
14. Install the left exhaust manifold bolts to the left cylinder head and bell housing.

Left:

15. Tighten the exhaust manifold bolts and nuts in the sequence shown.

Tighten the exhaust manifold bolts and nuts to 25 N.m (18 lb ft).




16. Tighten the left exhaust manifold bolt to the bell housing.

Tighten the left exhaust manifold bell housing bolt to 50 N.m (37 lb ft).




17. Install the left exhaust manifold heat shield.
18. Install the left exhaust manifold heat shield bolts.

Tighten the exhaust manifold heat shield bolts to 10 N.m (89 lb in).