Instrument Panel Insulator Panel Replacement - Left Side

Instrument Panel Insulator Panel Replacement - Left Side

Removal Procedure




1. Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the left lower closeout panel.




2. Remove the push-on retaining nut from the steering column bracket stud.
3. Release the push-in retainers to the left lower closeout panel from the I/P lower support beam.
4. Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
5. Lower and remove the closeout panel.
Release the notch in the right forward edge of the closeout panel from the tab on the accelerator pedal bracket.

Installation Procedure




1. Insert the I/P courtesy lamp down through the opening in the closeout panel.
2. Install the closeout panel into position.
3. Secure the closeout panel push-in retainers to the I/P lower support beam.
4. Secure the notch in the fight forward edge of the closeout panel to the tab on the accelerator pedal bracket.
Align, then push up to secure the panel.
5. Install the push-on retaining nut to the steering column bracket stud.




6. Align the I/P courtesy lamp to the closeout panel opening, then push to secure the lamp.