Instrument Panel Insulator Panel Replacement - Right Side

Instrument Panel Insulator Panel Replacement - Right Side

Removal Procedure




1. Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the right lower closeout panel.




2. Remove the push-in retainers on the right lower closeout panel from the I/P lower support beam.
3. Lower the closeout panel slightly, and carefully maneuver the left side of the closeout panel from above the driveline tunnel.
4. Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
5. Continue to lower the closeout panel, then pull to remove the closeout panel from the dash.

Installation Procedure




1. Install the right closeout panel under the dash.
2. Insert the I/P courtesy lamp down through the opening in the closeout panel.
3. Raise the closeout panel slightly, and carefully maneuver the left side of the closeout panel into position above the driveline tunnel.
4. Install the closeout panel push-in retainers to the I/P lower support beam.




5. Align the I/P courtesy lamp to the closeout panel opening, then push to secure the lamp in place.