Fog/Driving Lamp Bulb: Service and Repair

FRONT FOG LAMP BULB REPLACEMENT

REMOVAL PROCEDURE
1. Remove the front fascia lower close out panel.
2. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.






3. CAUTION: Refer to Halogen Bulb Caution.

Remove the fog lamp bulb/socket from the fog lamp by rotating the bulb/socket counterclockwise (1).




4. Remove the fog lamp bulb/socket (1).

INSTALLATION PROCEDURE




1. Install the bulb/socket (1) to the fog lamp.




2. Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
3. Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
4. Inspect the fog lamp for proper operation.
5. Install the front fascia lower close out panel.
6. Aim the fog lamp. Refer to Fog Lamp Aiming.