Electrical Diagrams
ENGINE CONTROLS SCHEMATICS
ECM Power, Ground, MIL, and Serial Data
5-Volt Reference Bussing
Low Reference Bussing
MAF/IAT, ECT, MAP Sensors, and Stop Lamp Switch Signal
Heated Oxygen Sensors
Electronic Throttle Controls
SCIAP, IAT2, BARO Sensors, Super Charger Vacuum Bypass Valve, and Charge Air Cooler (CAC) Coolant Pump
Ignition Coils Bank 1
Ignition Coils Bank 2
CKP and KS Sensors
CMP Sensors and Actuators
Fuel Injectors
EVAP Solenoids, and FTP Sensor
Fuel Pump Controls
Controlled/Monitored Subsystem References
Locations: The locations for the Connectors, Grounds, Splices, and Grommets shown within these diagrams can be found via their numbers at Vehicle Locations. Locations