Air Bypass Valve: Service and Repair

Supercharger Bypass Regulator Solenoid Valve Replacement

Removal Procedure




1. Remove the engine sight shield.
2. Disconnect the electrical connector (3) from the supercharger bypass regulator solenoid valve (2).
3. Disconnect the vacuum line fittings (4, 5) from the supercharger bypass regulator solenoid valve.
4. Remove the supercharger bypass regulator solenoid valve from the bracket.
5. Remove the bolt (1) and bracket if necessary.




6. Inspect the bypass regulator solenoid valve vacuum supply line and fittings (1, 2). Replace the vacuum line if necessary.




7. Inspect the bypass regulator solenoid valve to bypass valve actuator vacuum line and fittings (1, 2). Replace the vacuum line if necessary.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the bracket and bolt (1) if previously removed.

Tighten the supercharger bypass regulator solenoid valve bracket bolt to 9 N.m (80 lb in).

2. Install the bypass regulator solenoid valve (2) to the bracket.
3. Connect the vacuum line fittings (4, 5) to the bypass regulator solenoid valve.
4. Connect the electrical connector (3) to the bypass regulator solenoid valve.
5. Install the engine sight shield.