Console Compartment Door Replacement

Console Compartment Door Replacement

Removal Procedure

1. Open the console door.




2. Remove the console bin hinge cover. Pull at the rear of the cover to disengage the retainer.
3. Remove the screws retaining the console door to the door hinge.




4. Remove the console retaining nuts at the hinge.
5. Remove the door and the hinge from the console.

Installation Procedure




1. Position the console door and the hinge to the console.

Notice: Refer to Fastener Notice.

2. Install the nuts retaining the door hinge to the console.

Tighten the nuts to 10 N.m (89 lb in).




3. Install the screws retaining the door and the hinge to the console.

Tighten the screws to 1.9 N.m (17 lb in).

4. Install the console hinge cover to the console bin.
5. Close the console door. Verify for proper fit and latch operation.