Folding Top Headlining Trim Panel Retainer Replacement

Folding Top Headlining Trim Panel Retainer Replacement

Removal Procedure




1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation.
The distance (A) from the windshield header to the leading edge of the folding top panel is 400 mm (15.75 in).
2. Place a protective covering over the interior of the vehicle and the adjacent body panels.




3. Remove the screws from the retainer
4. Remove the retainer from the folding top.

Installation Procedure




1. Install the folding top headliner retainer.

Notice: Refer to Fastener Notice.

2. Install the screws to the retainer.

Tighten the screws to 2.5 N.m (22 lb in).

3. Manually close the folding top. Refer to Folding Top Manual Operation.