Scuff Plate: Service and Repair

Door Sill Plate Replacement

Removal Procedure




1. Open the door.
2. Use a flat-bladed tool to remove the trim bezel from the door sill plate.
3. Remove the retaining screws from the sill plate.
4. Lift the door sill plate off of the rocker panel.

Installation Procedure




1. Position the door sill plate to the rocker panel.

Notice: Refer to Fastener Notice.

2. Install the retaining screws to the door sill plate.

Tighten the screws to 2.3 N.m (22 lb in).

3. Install the trim bezel to the door sill plate.
4. Close the door.