Oil Pump Outlet Tube Replacement

Oil Pump Outlet Tube Replacement

Tools Required

J 39946 Crankshaft Socket

Removal Procedure

1. Remove the oil pump.




2. Align the primary timing marks (1) using the J 39946.
3. Remove the secondary camshaft drive chains.
4. Remove the primary drive chain tensioner.




5. Remove the oil outlet tube bolts (1-5).
6. Remove the oil outlet tube.




7. Remove and discard the oil outlet tube O-ring.
8. Clean and inspect the oil outlet tube.

Installation Procedure




1. Install a NEW O-ring on the oil outlet tube.




2. Install the oil outlet tube and bolts.

Tighten the oil outlet tube bolts to 10 N.m (89 lb in).




3. Ensure the primary timing marks (1) are aligned vertically.
4. Install the primary drive chain tensioner.
5. Install the secondary camshaft drive chains.
6. Install the oil pump.