Front Fog Lamp Replacement

FRONT FOG LAMP REPLACEMENT

REMOVAL PROCEDURE
1. Remove the front fascia lower close out panel.




2. Disconnect the electrical connector from the bulb/socket (2).
3. Remove the nuts (3) attaching front fog lamp (1) to the front fascia.
4. Remove the fog lamp (1) from the fascia.
5. Remove the bulb/socket from fog lamp.

INSTALLATION PROCEDURE
1. Install the bulb/socket to fog lamp.




2. Install the fog lamp (1) to the fascia.

3. NOTE: Refer to Fastener Notice.

Install fog lamp nuts (3).

Tighten the nuts to 6 N.m (53 lb in).

4. Connect the fog lamp electrical connector to the bulb/socket (2).
5. Inspect the fog lamp for proper operation.
6. Install the front fascia lower close out panel.
7. Aim the fog lamp. Refer to Fog Lamp Aiming.