Ignition Coil Module Replacement - Right Side

Ignition Coil Module Replacement - Right Side

Removal Procedure




1. Remove the fuel injector sight shield.




2. Disconnect the ignition coil assembly electrical connector.
3. Remove the ignition coil assembly retaining bolts.
4. Carefully remove the ignition coil assembly.

Installation Procedure




1. Carefully install the ignition coil assembly.

Notice: Refer to Fastener Notice.

2. Install the ignition coil assembly retaining bolts.

Tighten the ignition coil assembly retaining bolts to 10 N.m (89 lb in).




3. Reconnect the ignition coil assembly electrical connector.




4. Install the fuel injector sight shield.