Rear Axle Disassemble

Rear Axle Disassemble


Special Tools
* J 24433 Pinion Cone & Side Bearing Installer
* J 45008 Side Bearing Race Remover







1. Remove the differential assembly (2) from the carrier (1).




2. Using the J 24433 and a hammer, remove the axle seal (1) from the side cover (2).




3. Using the J 24433 and a hammer, remove the axle oil seal (1) from the differential housing (2).




4. Install the J 45008 (2) behind the bearing cup (3).

Important: Mark or tag the shim and the race carrier.


5. Place the carrier in a press.
6. Place the J 24433 (1) against J 45008 (2) and press out the cup.