Control Module: Service and Repair

Transfer Case Shift Control Module Replacement

Removal Procedure

1. Remove the right side instrument panel insulator. Refer to Instrument Panel Insulator Replacement - Right Side (Service and Repair) .




2. Remove the electrical connectors (1) from the transfer case shift control module (4).




3. Remove the transfer case shift control module (1) from the instrument panel insulator (2).



Installation Procedure





1. Install the transfer case shift control module (1) to the instrument panel insulator (2).




2. Install the electrical connectors (1) to the transfer case shift control module (4).
3. Install the right side instrument panel insulator. Refer to Instrument Panel Insulator Replacement - Right Side (Service and Repair) .
4. For module programming and setup information, refer to Control Module References (Programming and Relearning) .