Trunk / Liftgate Striker: Service and Repair

Rear Compartment Lid Latch Striker Replacement

Removal Procedure

1. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .
2. Remove the rear fascia. Refer to Rear Bumper Fascia Replacement (Rear Bumper Fascia Replacement) .




3. Remove the nuts securing the latch striker to the vehicle.
4. Remove the rear compartment latch striker.



Installation Procedure





1. Position the rear compartment latch striker to the vehicle.
2. Install the nuts in order to secure the latch striker to the vehicle.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Adjust the rear compartment latch striker as necessary.

Tighten the latch striker fasteners to 9 N.m (80 lb in).

4. Install the rear fascia. Refer to Rear Bumper Fascia Replacement (Rear Bumper Fascia Replacement) .
5. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .