Parking Brake Warning Switch: Service and Repair

Parking Brake Indicator Switch Replacement

Removal Procedure





1. Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (Service and Repair) .
2. Disconnect the parking brake indicator switch electrical connector.
3. Remove the parking brake indicator switch bolt (1).
4. Remove the parking brake indicator switch (2).



Installation Procedure





1. Assemble the parking brake indicator switch bolt (1) to the parking brake indicator switch (2).
2. Install the parking brake indicator switch assembly to the parking brake lever.
Align the pin on the indicator switch to the locator hole on the parking brake lever.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Tighten the parking brake indicator switch bolt.

Tighten the bolt to 7 N.m (62 lb in).

4. Connect the parking brake indicator switch electrical connector.
5. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (Service and Repair) .