Extension Disassemble

Extension Disassemble


Tools Required
* DT-47722 Shift Shaft Seal Installer
* J 2619-01 Slide Hammer
* J 26941 Bushing and Bearing Remover 3-4 in






1. Using J 2619-01 (1) and J 26941 (2) , remove the rear output shaft seal (92).




2. Using J 2619-01 (1) and J 26941 (2) , remove the rear output shaft bearing assembly (89).




3. Using tool DT-47722 , remove the shift shaft seal (88).