Engine Mount Strut Replacement - Right

Engine Mount Strut Replacement - Right Side

Removal Procedure





1. Remove the surge tank nuts and push pin retainer.
2. Remove the surge tank from the studs and position the tank aside.




3. Remove the engine mount strut bolt.
4. Remove the engine mount strut.



Installation Procedure





1. Install the engine mount strut.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the engine mount strut bolt.

Tighten the bolt to 70 N.m (52 lb ft).





3. Position the surge tank to the studs.
4. Install the surge tank nuts and push pin retainer.

Tighten the nuts to 6 N.m (53 lb in).