Water Pump Replacement

Water Pump Replacement

Removal Procedure





1. Remove the water pump housing. Refer to Engine Coolant Crossover Pipe Replacement (Service and Repair) .
2. Remove the water pump cover bolt/studs.
3. Remove the water pump cover.




4. Remove the water pump bolts.
5. Remove the water pump.




6. Remove and discard the water pump O-ring seal.



Installation Procedure





1. Install a NEW water pump O-ring seal.




2. Install the water pump.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the water pump bolts.

Tighten the bolts to 10 N.m (89 lb in).





4. Remove the water pump cover.





Important: Ensure that the bolt is installed in the lower inboard position (1) and the studs are installed in the remaining positions (2).


5. Remove the water pump cover bolt/studs.

Tighten the bolt/studs to 10 N.m (89 lb in).

6. Install the water pump housing. Refer to Engine Coolant Crossover Pipe Replacement (Service and Repair) .