Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Remove the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair) .




2. Remove the engine oil pressure switch (1) from the oil filter adapter (3).



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the engine oil pressure switch (1) to the oil filter adapter (3).

Tighten the engine oil pressure switch to 16 N.m (12 lb ft).

2. Install the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair) .
3. Lower the vehicle.
4. Adjust the engine oil level to the full mark.
5. Inspect for oil leaks after engine start up.