Fan Replacement

Fan Replacement (LH2 - Gas, 8 Cyl, 4.6L, SFI, V8, DOHC, HO, Alum)

Tools Required

J 41240 Fan Clutch Remove and Installer


Removal Procedure





1. Remove the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair) .

Important:
* The fan nut has left hand (reverse) threads.

* Do not completely remove the fan from the crank adapter shaft.



2. Loosen the fan nut from the crank adapter shaft using J 41240 .
3. Remove the fan shroud. Refer to Fan Shroud Replacement (LH2) (Service and Repair)Fan Shroud Replacement (LY7) (Service and Repair) .
4. Continue to loosen the fan nut and disconnect the fan from the crank adapter shaft.
5. Remove the fan from the vehicle.



Installation Procedure






Important: The fan nut has left hand (reverse) threads.


1. Install the fan to the vehicle.
2. Connect the fan to the crank adapter shaft.
3. Install the fan shroud. Refer to Fan Shroud Replacement (LH2) (Service and Repair)Fan Shroud Replacement (LY7) (Service and Repair) .

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Tighten the fan nut to the crank adapter shaft using J 41240 .

Tighten the nut to 100 N.m (74 lb ft).

5. Install the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement (Service and Repair) .