Fan Replacement

Fan Replacement (LY7 - Gas, 6 CYL, 3.6L, SFI, V6, Alum)

Tools Required

J 41240 Fan Clutch Wrench


Removal Procedure





1. Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement (Service and Repair) .
2. Loosen the fan nut from the crank adapter shaft using J 41240 .
3. Remove the fan from the vehicle.



Installation Procedure





1. Install the fan to the vehicle.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Tighten the fan nut to the crank adapter shaft using J 41240 .

Tighten the nut to 100 N.m (74 lb ft).

3. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement (Service and Repair) .