Battery Current Sensor: Service and Repair

Battery Current Sensor Replacement

Removal Procedure

1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LC3) (Service and Repair)Battery Negative Cable Replacement (LH2 (LHD) with Top Post) (Service and Repair)Battery Negative Cable Replacement (LH2) (Service and Repair)Battery Negative Cable Replacement (LY7 and LLT (LHD) With Top Post) (Service and Repair)Battery Negative Cable Replacement (LY7) (Service and Repair) .




2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
3. Squeeze the negative battery cable branches together.

Important: Note the position of the battery current sensor prior to removal.


4. Slide the battery current sensor (2) off of the negative battery cable (1).



Installation Procedure






Important: Ensure that the tape tab is pointing away from the battery prior to installation.


1. Squeeze the negative battery cable branches together, while sliding the NEW battery current sensor (2) up onto the negative battery cable (1).
2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (LC3) (Service and Repair)Battery Negative Cable Replacement (LH2 (LHD) with Top Post) (Service and Repair)Battery Negative Cable Replacement (LH2) (Service and Repair)Battery Negative Cable Replacement (LY7 and LLT (LHD) With Top Post) (Service and Repair)Battery Negative Cable Replacement (LY7) (Service and Repair) .