Hood Open Assist Rod Stud Replacement

Hood Open Assist Rod Stud Replacement

Removal Procedure

1. Open the hood.




Caution: Refer to Hood Hold-Open Device Caution (Service Precautions) .
2. Release the clip retaining the hood assist rod to the lower hood assist rod ball stud. Refer to Hood Open Assist Rod Replacement (Service and Repair) .
3. Remove the lower hood assist rod ball stud (1) from the front structure (2).



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the lower hood assist rod ball stud (1) to the front structure (2).

Tighten to 9 N.m (80 lb in).

2. Install the hood assist rod. Refer to Hood Open Assist Rod Replacement (Service and Repair) .
3. Insure that the clip is fully seated on the hood assist rod.
4. Close the hood.