Passenger Seat Outer Finish Panel Replacement

Passenger Seat Outer Finish Panel Replacement

Removal Procedure

1. Remove the seat from the vehicle. Refer to Seat Replacement (Seat Replacement) .




2. Remove the retaining screws at the bottom of the finish panel.




3. Remove the finish panel from the bracket by lifting upwards to disengage.




4. Remove the seat control switch knob from the finish panel by pulling the knob outward.




5. Remove the seat back switch knob from the finish panel by pulling the knob outward.




6. Using a flat-bladed tool, remove the following switches in order from the finish panel:

1. The lumbar switch
2. The seat control switch
3. The memory switch

7. Remove the finish panel.



Installation Procedure

1. Position the finish panel to the seat.




2. Install the following switches in order to the finish panel:

1. The memory switch
2. The seat control switch
3. The lumbar switch





3. Install the seat back switch knob to the finish panel by pushing the knob to engage the switch.




4. Install the seat control switch knob to the finish panel by pushing the knob to engage the switch.




5. Install the upper edge of the finish panel to the bracket and swing the panel downward to engage.





Notice: Refer to Fastener Notice (Fastener Notice) .

6. Install the retaining screws at the bottom of the finish panel.

Tighten the screws to 2.5 N.m (22 lb in).

7. Install the seat to the vehicle. Refer to Seat Replacement (Seat Replacement) .