Daytime Running Lamp: Service and Repair

Daytime Running Lamp (DRL) Ambient Light Sensor Replacement

Removal Procedure

1. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .




2. Disconnect the electrical connector to the ambient light sensor.
3. Twist to release the daytime running lamps (DRL) sensor from the I/P trim pad.



Installation Procedure





1. Twist to secure the DRL sensor to the I/P trim pad
2. Connect the electrical connector to the DRL sensor.
3. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement (Service and Repair) .