Turn Signal Switch: Service and Repair

Turn Signal Multifunction Switch Replacement

Removal Procedure

Caution: Refer to SIR Caution (SIR Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .
2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .




3. Remove the retaining screws from the multifunction switch.
4. Disconnect the multifunction switch electrical connections.
5. Remove the multifunction switch.



Installation Procedure

1. Connect the multifunction switch electrical connectors.
2. Install the multifunction switch to the steering column.





Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the retaining screws to the multifunction switch.

Tighten the screws to 3.4 N.m (30 lb in).

4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
5. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair) .