Sun Visor: Service and Repair

Sunshade Replacement

Removal Procedure





1. Tilt the sunshade down toward the windshield.
2. Insert a flat-headed tool under the sunshade bezel at the windshield header.
3. Remove the sunshade retaining screws.
4. Remove the sunshade from the windshield header.
5. Disconnect the electrical connector from the sunshade.



Installation Procedure





1. Install the sunshade to the windshield header.
2. Connect the harness to the sunshade electrical connector.
3. Push the connector through the hole into the windshield header.

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Install the sunshade retaining screws.

Tighten the screws to 2 N.m (18 lb in).

5. Rotate the sunshade toward the centerline of the vehicle until the sunshade locks in place.