Body Hinge Pillar Trim Panel Replacement

Body Hinge Pillar Trim Panel Replacement

Removal Procedure





1. Remove the fastener attaching the top of the upper trim panel and the windshield side garnish molding to the hinge pillar.
2. Unsnap the upper trim from the hinge pillar.
3. Remove the upper trim.
4. Remove the lower hinge pillar trim if needed. The lower trim is part of the sill plate. Refer to Carpet Retainer Replacement (Service and Repair) .



Installation Procedure





1. Snap the upper trim to the hinge pillar.
2. Install the fastener attaching the top of the upper trim.
3. Install the lower hinge panel trim. Refer to Carpet Retainer Replacement (Service and Repair) .