Rear Compartment Sill Trim Plate Replacement

Rear Compartment Sill Trim Plate Replacement

Removal Procedure





1. Open the rear compartment.
2. Remove the rear compartment convenience net.
3. Remove the 4 sill plate retainers.
4. Pull up on the sill plate to release the spring clips.
5. Remove the sill plate from the rear compartment.



Installation Procedure





1. Align the spring clips to the slots in the rear compartment.
2. Press down on the rear compartment sill plate with even pressure until the plate is fully seated.
3. Press in the 4 sill plate retainers.
4. Install the convenience net.
5. Close the rear compartment.