Rear Floor Trim Plate Replacement

Rear Floor Trim Plate Replacement

Removal Procedure





1. Open the rear compartment.
2. Remove the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .
3. Remove the roof lift-off panel/window latch trim. Refer to Roof Lift Off Panel/Window Latch Trim Cover Replacement (Service and Repair) .
4. Remove the rear compartment partition. Refer to Rear Compartment Front Partition Replacement (Service and Repair) .
5. Remove the forward floor trim plate attachments. Remove the elastic loops from the pins.
6. Lift up on the center of the floor trim plate and remove either edge from the side panel.
7. Remove the floor trim plate from the rear compartment.



Installation Procedure





1. Position the floor trim plate into the rear compartment.
2. Engage the sides of the floor trim plate, pressing the sides into place.
3. Install the forward floor trim plate attachments. Attach the elastic loops to the pins.
4. Install the rear compartment partition. Refer to Rear Compartment Front Partition Replacement (Service and Repair) .
5. Install the roof lift-off panel/window latch trim. Refer to Roof Lift Off Panel/Window Latch Trim Cover Replacement (Service and Repair) .
6. Install the rear compartment sill plate. Refer to Rear Compartment Sill Trim Plate Replacement (Service and Repair) .
7. Close the rear compartment.