Driver Seat Rear Panel Bracket Replacement

Driver Seat Rear Panel Bracket Replacement

Removal Procedure





1. Remove the finish panel. Refer to Driver Seat Outer Finish Panel Replacement (Driver Seat Outer Finish Panel Replacement) .
2. Remove the retaining screws from the rear panel bracket and remove the bracket from the seat.



Installation Procedure





1. Position the rear panel bracket to the seat using 2 small punch tools to locate the bracket holes in the seat frame.
2. Remove 1 punch tool and install the retaining screw. Do NOT tighten.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Repeat the procedure for the remaining screw.

Tighten the screws to 2.5 N.m (22 lb in).

4. Install the finish panel. Refer to Driver Seat Outer Finish Panel Replacement (Driver Seat Outer Finish Panel Replacement) .