Driver Knee Bolster Bracket Replacement

Driver Knee Bolster Bracket Replacement

Removal Procedure

1. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .





Important: The following step must be performed to assure proper trim fits during installation.


2. Mark the location of the driver knee bolster bracket.
3. Remove the screws retaining the driver knee bolster bracket to the steering column bracket.
4. Remove the driver knee bolster bracket.



Installation Procedure





1. Install the driver knee bolster bracket into position as marked prior to removal.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the screws which retain the driver knee bolster bracket to the steering column bracket.

Tighten the screws to 1.9 N.m (17 lb in).

3. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair) .